-
Very powerful SDS Max (TE-Y) rotary hammer for heavy-duty drilling and chiselling in concrete
- Weight according to EPTA-Procedure 01/2003 without battery: 10 kg
- Single impact energy: 14.5 J
- Hammer drilling diameter range: 12 – 150 mm
TE 70-ATC/AVR Rotary Hammer
- Active Torque Control (ATC) stops the tool body from spinning uncontrollably if the drill bit jams – helping to reduce a common safety hazard
- Active Vibration Reduction (AVR) makes the tool less tiring to use – helping to increase daily productivity
- Virtually maintenance-free brushless SR motor and double-chamber lubrication systems for longer service intervals and tool lifetime
- Optional DRS-Y dust removal system collects up to 95% of dust
- Detachable supply cord for quicker and easier replacement of damaged/broken cords on the jobsite
- Hammer drilling in concrete, masonry and natural stone with drill bits 12 – 150 mm in diameter
- Drilling holes for heavy-duty anchors from 20-40 mm in diameter
- Breaching and demolition with pointed and flat chisels
- Hammer drilling in concrete, masonry and natural stone with drill bits 1/2″ – 6″ in diameter
- Drilling holes for heavy-duty anchors from 3/4″ – 1-3/4″ in diameter
Weight according to EPTA-Procedure 01/2003 without battery 10 kg
Single impact energy 14.5 J
Hammer drilling diameter range 12 – 150 mm
Optimum hammer drilling range 20 – 55 mm
Hammer drilling RPM 245 rpm
Full hammering frequency 2830 impacts/minute
Functionality Active Torque Control (ATC), Chiselling, Power reduction, Active Vibration Reduction (AVR)
Triaxial vibration value for hammer drilling into concrete (ah,HD) 8.6 m/s² 1
Dust removal system available TE DRS-Y, TE DRS-D
Triaxial vibration for chiselling in concrete 7.8 m/s² 2
Rated input power 2100 W
A-weighted emission sound power level 113 dB (A) 3
A-weighted emission sound pressure level 103 dB (A) 4
Best & Easy Rental Services
Related Tools
Fully automatic, high-productivity, compact powder actuated tool for fastening collated nails
- Dimensions (LxWxH): 404 x 56 x 164 mm
- Weight: 2.44 kg
- Fastener intake: 10 nails
Semi-automatic powder-actuated tool for fastening single nails in medium-duty applications on both concrete and steel
- Dimensions (LxWxH): 345 x 50 x 157 mm
- Weight: 2.4 kg
- Fastener intake: Single
22V cordless nailer for fastening X-BT threaded stud
- Dimensions (LxWxH): 490 x 134 x 255 mm
- Tool body weight: 3.452 kg
- Fastener intake: Threaded stud
Cordless drill driver with interchangeable chucks, more torque, higher RPM and adjustable speed
- Maximum torque (soft/hard joint): 55 Nm (soft joint), 75 Nm (hard joint)
- No load RPM: gear 1: 365 rpm; gear 2: 625 rpm; gear 3: 1440 rpm; gear 4: 2460 rpm
- Chuck clamping range: 2 – 13 mm
High-capacity cordless nibbler for cutting sheet metal and profiles with more speed and minimal distortion (Nuron battery platform)
- Material type: Flat sheet, Corrugated sheet, Trapezoidal sheet, C.L.U. profile
- Rated voltage: 21.6 V
- Tool body weight: 2 kg
Cordless double cut shear for fast cuts in sheet metal and profiles up to 2.5 mm│12 Gauge – with Hilti SSH CS blades included (Nuron battery platform)
- Material type: Flat sheet, C.L.U. profile
- Rated voltage: 21.6 V
- Tool body weight: 2.2 kg
