-
Powerful and cordless SDS Max (TE-Y) rotary hammer with Active Vibration Reduction and Active Torque Control for heavy-duty concrete drilling and chiseling (Nuron)
- Weight according to EPTA-Procedure 01/2003 without battery: 6.3 kg
- Optimum hammer drilling range: 18 – 40 mm
- Hammer drilling diameter range: 12 – 100 mm
TE 60-22 Cordless Rotary Hammer
- Outsized performance – weighing in at just 8.1 kg (inc. B 22-170 battery), TE 60-22 has the drilling and chipping power you’d expect from a much heavier cordless rotary hammer
- Maximized working time per charge – brushless motor and more efficient Nuron batteries help you get up to 3x more battery run time
- Upgraded safety features – includes Active Torque Control (ATC) to better protect you from uncontrolled spinning if the bit jams, and Active Vibration Reduction (AVR) for increased shielding from vibration
- Longer trigger time – minimal vibration so that you can work with fewer interruptions
- On the Nuron battery platform – cordless rotary hammers without compromise thanks to longer-lasting batteries, power-saving drill bits and a range of services to keep you productive, today and tomorrow
- Extremely versatile rotary hammer drill for heavy-duty concrete construction work as well as building services installation
- Drilling holes for post-installed reinforcing bar connections in concrete (recommended diameter range 20-40 mm)
- Drilling holes for pipe penetrations or plug sockets through concrete and masonry
- Chiseling openings and channels in concrete or masonry
- Digging holes in earth – SDS Max clay spade available separately
Weight according to EPTA-Procedure 01/2003 without battery 6.3 kg
Optimum hammer drilling range 18 – 40 mm
Hammer drilling diameter range 12 – 100 mm
Rated voltage 21.6 V
Single impact energy 8.1 J
Hammer drilling RPM 340 rpm
Full hammering frequency 3300 impacts/minute
Functionality Active Torque Control (ATC), Active Vibration Reduction (AVR), Hammer drilling, Chiselling, Power reduction
Triaxial vibration value for hammer drilling into concrete (ah,HD) 10.7 m/s² 1
Triaxial vibration for chiselling in concrete 9.1 m/s² 2
Dust removal system available TE DRS-Y, TE DRS-D
A-weighted emission sound pressure level 98 dB (A) 3
A-weighted emission sound power level 106 dB (A) 4
Best & Easy Rental Services
Related Tools
Fully automatic, high-productivity, compact powder actuated tool for fastening collated nails
- Dimensions (LxWxH): 404 x 56 x 164 mm
- Weight: 2.44 kg
- Fastener intake: 10 nails
Semi-automatic powder-actuated tool for fastening single nails in medium-duty applications on both concrete and steel
- Dimensions (LxWxH): 345 x 50 x 157 mm
- Weight: 2.4 kg
- Fastener intake: Single
22V cordless nailer for fastening X-BT threaded stud
- Dimensions (LxWxH): 490 x 134 x 255 mm
- Tool body weight: 3.452 kg
- Fastener intake: Threaded stud
Cordless drill driver with interchangeable chucks, more torque, higher RPM and adjustable speed
- Maximum torque (soft/hard joint): 55 Nm (soft joint), 75 Nm (hard joint)
- No load RPM: gear 1: 365 rpm; gear 2: 625 rpm; gear 3: 1440 rpm; gear 4: 2460 rpm
- Chuck clamping range: 2 – 13 mm
High-capacity cordless nibbler for cutting sheet metal and profiles with more speed and minimal distortion (Nuron battery platform)
- Material type: Flat sheet, Corrugated sheet, Trapezoidal sheet, C.L.U. profile
- Rated voltage: 21.6 V
- Tool body weight: 2 kg
Cordless double cut shear for fast cuts in sheet metal and profiles up to 2.5 mm│12 Gauge – with Hilti SSH CS blades included (Nuron battery platform)
- Material type: Flat sheet, C.L.U. profile
- Rated voltage: 21.6 V
- Tool body weight: 2.2 kg
