Exceptionally powerful breaker for heavy-duty concrete demolition, asphalt cutting, earthwork and driving ground rods
- Working direction: Floor
- Tool chuck type: TE-H (Hilti HEX 28)
- Weight according to EPTA-Procedure 01/2003 without battery: 27.1 kg
TE 3000-AVR Heavy-duty Electric Jackhammer
- Upgraded performance – the TE 3000 now delivers demolition power comparable to 45 kg air-powered breakers
- Improved handling – 10% weight reduction and new top handle make the jackhammer easier to control and transport
- Active Vibration Reduction (AVR) – vibration-damped jackhammer with two fully decoupled handles and -10% lower vibration than previous TE 3000 models
- Redesigned quick change chuck – takes new Hilti TE-H chisels
- Virtually maintenance-free brushless motor and triple-chamber lubrication systems for less downtime and longer lifetime
- Demolishing reinforced concrete slabs and foundations
- Breaking/cutting asphalt in civil road construction, pipe laying and pavement repair
- Removing concrete for structural restoration, slab extensions, rebar reinforcement and repair
- Digging, trenching and tamping in rocky, hard clay and other dense earthwork
- Setting ground rods in hard soils for a safer, ladder-free installation of earthing rods (optional TE-H PD Power Driver required)
Working direction Floor
Tool chuck type TE-H (Hilti HEX 28)
Weight according to EPTA-Procedure 01/2003 without battery 27.1 kg
Single impact energy 85 J
Full hammering frequency 858 impacts/minute
Max. chiselling performance 60000 cm³/min
Dimensions (LxWxH) 820 x 588 x 218 mm
Triaxial vibration for chiselling in concrete 6.3 m/s² 1
Dust removal system available TE DRS-H
A-weighted emission sound pressure level 98 dB (A) 2
Rated input power 2100 W
Best & Easy Rental Services
Related Tools
Fully automatic, high-productivity, compact powder actuated tool for fastening collated nails
- Dimensions (LxWxH): 404 x 56 x 164 mm
- Weight: 2.44 kg
- Fastener intake: 10 nails
Semi-automatic powder-actuated tool for fastening single nails in medium-duty applications on both concrete and steel
- Dimensions (LxWxH): 345 x 50 x 157 mm
- Weight: 2.4 kg
- Fastener intake: Single
22V cordless nailer for fastening X-BT threaded stud
- Dimensions (LxWxH): 490 x 134 x 255 mm
- Tool body weight: 3.452 kg
- Fastener intake: Threaded stud
Cordless drill driver with interchangeable chucks, more torque, higher RPM and adjustable speed
- Maximum torque (soft/hard joint): 55 Nm (soft joint), 75 Nm (hard joint)
- No load RPM: gear 1: 365 rpm; gear 2: 625 rpm; gear 3: 1440 rpm; gear 4: 2460 rpm
- Chuck clamping range: 2 – 13 mm
High-capacity cordless nibbler for cutting sheet metal and profiles with more speed and minimal distortion (Nuron battery platform)
- Material type: Flat sheet, Corrugated sheet, Trapezoidal sheet, C.L.U. profile
- Rated voltage: 21.6 V
- Tool body weight: 2 kg
Cordless double cut shear for fast cuts in sheet metal and profiles up to 2.5 mm│12 Gauge – with Hilti SSH CS blades included (Nuron battery platform)
- Material type: Flat sheet, C.L.U. profile
- Rated voltage: 21.6 V
- Tool body weight: 2.2 kg
