Powerful and extremely light TE-S breaker for concrete and demolition work
- Working direction: Floor
- Tool chuck type: TE-S
- Weight according to EPTA-Procedure 01/2003 without battery: 14.5 kg
TE 2000-AVR Electric Jackhammer
- Very low tool weight combined with high demolition performance for dedicated floor breaking
- T-design for perfect handling in floor-breaking applications
- Maintenance-free brushless SR motor and triple-chamber lubrication systems for longer service intervals and tool lifetime
- Active Vibration Reduction (AVR) makes the tool less tiring to use – helping to increase daily productivity
- Detachable supply cord for quick and easy replacement of damaged/broken cords on the jobsite
- Medium-duty demolition of concrete slabs and foundations
- Removing concrete for rebar connections and utility connections
- Breaking work on concrete or other materials in basements and on patios in residential applications
- Breaking out channels for laying pipe in plumbing applications
Working direction Floor
Tool chuck type TE-S
Weight according to EPTA-Procedure 01/2003 without battery 14.5 kg
Single impact energy 35 J
Full hammering frequency 1800 impacts/minute
Max. chiselling performance 14200 cm³/min
Dimensions (LxWxH) 731 x 574 x 146 mm
Triaxial vibration for chiselling in concrete 3.9 m/s² 1
Dust removal system available TE DRS-B
A-weighted emission sound pressure level 88 dB (A) 2
Best & Easy Rental Services
Related Tools
Fully automatic, high-productivity, compact powder actuated tool for fastening collated nails
- Dimensions (LxWxH): 404 x 56 x 164 mm
- Weight: 2.44 kg
- Fastener intake: 10 nails
Semi-automatic powder-actuated tool for fastening single nails in medium-duty applications on both concrete and steel
- Dimensions (LxWxH): 345 x 50 x 157 mm
- Weight: 2.4 kg
- Fastener intake: Single
22V cordless nailer for fastening X-BT threaded stud
- Dimensions (LxWxH): 490 x 134 x 255 mm
- Tool body weight: 3.452 kg
- Fastener intake: Threaded stud
Cordless drill driver with interchangeable chucks, more torque, higher RPM and adjustable speed
- Maximum torque (soft/hard joint): 55 Nm (soft joint), 75 Nm (hard joint)
- No load RPM: gear 1: 365 rpm; gear 2: 625 rpm; gear 3: 1440 rpm; gear 4: 2460 rpm
- Chuck clamping range: 2 – 13 mm
High-capacity cordless nibbler for cutting sheet metal and profiles with more speed and minimal distortion (Nuron battery platform)
- Material type: Flat sheet, Corrugated sheet, Trapezoidal sheet, C.L.U. profile
- Rated voltage: 21.6 V
- Tool body weight: 2 kg
Cordless double cut shear for fast cuts in sheet metal and profiles up to 2.5 mm│12 Gauge – with Hilti SSH CS blades included (Nuron battery platform)
- Material type: Flat sheet, C.L.U. profile
- Rated voltage: 21.6 V
- Tool body weight: 2.2 kg
