-
Powerful cordless SDS Plus (TE-C) rotary hammer with Active Vibration Reduction and Active Torque Control for concrete drilling and chiseling (Nuron battery platform)
- Weight according to EPTA-Procedure 01/2003 without battery: 3.9 kg
- Optimum hammer drilling range: 10 – 25 mm
- Single impact energy: 3.8 J
TE 30-22 Cordless Rotary Hammer
- Our most powerful SDS Plus cordless rotary hammer drill ever, still weighing just 5.1 kg (including B 22-170 battery)
- Exceptional drilling speed – drills through reinforcing bar up to 200% faster than predecessors
- More run time per charge – drills up to twice as long as comparable SDS Plus rotary hammers thanks to the combination of brushless motor and revolutionary Nuron batteries
- Versatility – with a wider optimal drilling range and extensive range of chisel bits and hole saws available, TE 30-22 is an extremely versatile tool with a wide range of capabilities for any jobsite
- Comprehensive safety features – includes Active Torque Control (ATC) to better protect you from uncontrolled spinning if the bit jams
- Drilling anchor holes in concrete and masonry (recommended diameter range 10-28 mm)
- Drilling holes for reinforcing bar doweling
- Virtually dust-free drilling (TE DRS-C or TE DRS-D vacuum cleaner connector required)
- light-duty chiseling – such as tile scraping, channel cleaning and surface correction
- Occasional drilling in wood and steel (optional quick-release chuck required)
Weight according to EPTA-Procedure 01/2003 without battery 3.9 kg
Optimum hammer drilling range 10 – 25 mm
Single impact energy 3.8 J
Hammer drilling diameter range 5 – 28 mm
Hammer drilling RPM 777 rpm
Full hammering frequency 4500 impacts/minute
Functionality Active Torque Control (ATC), Active Vibration Reduction (AVR), Chiselling, Chipping, Depth gauge, Removable chuck, Reverse mode, Torque clutch
Triaxial vibration value for hammer drilling into concrete (ah,HD) 11.1 m/s² 1
Triaxial vibration for chiselling in concrete 8.5 m/s² 2
A-weighted emission sound power level 102 dB (A) 3
A-weighted emission sound pressure level 91 dB (A) 4
Dust removal system available TE DRS-D, TE DRS-C
Best & Easy Rental Services
Related Tools
Fully automatic, high-productivity, compact powder actuated tool for fastening collated nails
- Dimensions (LxWxH): 404 x 56 x 164 mm
- Weight: 2.44 kg
- Fastener intake: 10 nails
Semi-automatic powder-actuated tool for fastening single nails in medium-duty applications on both concrete and steel
- Dimensions (LxWxH): 345 x 50 x 157 mm
- Weight: 2.4 kg
- Fastener intake: Single
22V cordless nailer for fastening X-BT threaded stud
- Dimensions (LxWxH): 490 x 134 x 255 mm
- Tool body weight: 3.452 kg
- Fastener intake: Threaded stud
Cordless drill driver with interchangeable chucks, more torque, higher RPM and adjustable speed
- Maximum torque (soft/hard joint): 55 Nm (soft joint), 75 Nm (hard joint)
- No load RPM: gear 1: 365 rpm; gear 2: 625 rpm; gear 3: 1440 rpm; gear 4: 2460 rpm
- Chuck clamping range: 2 – 13 mm
High-capacity cordless nibbler for cutting sheet metal and profiles with more speed and minimal distortion (Nuron battery platform)
- Material type: Flat sheet, Corrugated sheet, Trapezoidal sheet, C.L.U. profile
- Rated voltage: 21.6 V
- Tool body weight: 2 kg
Cordless double cut shear for fast cuts in sheet metal and profiles up to 2.5 mm│12 Gauge – with Hilti SSH CS blades included (Nuron battery platform)
- Material type: Flat sheet, C.L.U. profile
- Rated voltage: 21.6 V
- Tool body weight: 2.2 kg
